parting 83 R100RT all parts are very good condition unless otherwise stated

Bean Can ignition sensor, has broken lock on plug but is still functional 100.00

alternator stator and housing 65.00

alternator rotor 60.00

rear master cylinder(needs kit) with clean reservoir, 40.00

rear master cylinder bracket 20.00

rear disk brake caliper carrier 40.00

rear brake force support 15.00

rear disk brake pedal with linkage 50.00

rear brake caliper 65.00

rear brake lines 30.00

left front brake caliper 65.00

front fender long police, white but not pearl white 100.00,

pearl white rear fender 40.00,

very clean frame w/title 150.00,

very clean sub frame 70.00,

front tubes with black legs 75.00 each

complete wiring harness with nice thumb controls 125.00, or will sell still connected to headlight bucket. 150.00

front snowflake wheel 125.00,

rear snowflake wheel 125.00,

final drive 32/11 rear disk type 200.00,some wear

steering stabilizer 65.00,

very clean side stand 45.00,

headlight bucket 40.00,

clean left handlebar controls set 50, tight

exhaust nuts 40.00,

starter cover 30.00,

front motor cover 30.00,

timing chain cover 35.00

battery box 35.00,

complete clutch w/carrier 60.00,

seat cowl tray 40.00,

horns pair 40.00,

starter 60.00,

clean, swing arm w/shaft 100.00,

air box 40.00,

chrome handle bars 40.00,

chrome bag mounts with top luggage tabs 75.00,

passenger foot pegs 30.00

shifter assembly 35.00

diode board 30.00,

all items + shipping, will combine shipping and will do package deals.

please feel free to ask any questions or for pictures, thanks.

Price: 20-150

A set of new in the box R65LS rear brake shoes:Ferodo #FSB804 (EBC #862)BMW R65LS$50 which includes shipping. New set about $140 from BMW Check or MO. Ask for pic.

MAC deep oil pan, gaskets, pick-up extension and bolts for extension. Best for 1970-80 models, but can be used with later models (most 1981+ require earlier sump pick-up which I have). $75/obo

Morris Industries aluminum wheel set for twin shock, rear disk brake models...19" front, 18" rear. Bare wheels only...they will need a drive cup (wheel splines) and bearings/spacers (common off-the-shelf bearings and easy to machine spacers...any somewhat competent machine shop would be able to make the missing parts). Very nice condition...original paint is faded. $450.

A pair of hardly used Krauser engine protection bars from the 70s. Excellent chrome, absolutely unmarked and complete with the Krauser labels, these are hard to find in such good condition. Mounted for just 800 miles, they will enhance many BMW models with a period look.Shipped in the continental USA only; Paypal preferred.

Parting-out a 1977 R100s with 70k miles. Prices shown do not include shipping. Check link for part availability.

6-Pack rack: $50.

"S" air box: $50.

Altenator: $30.

Bar risers: $35.

Blinkers, body, lense, & reflector: $15. each

Pair of coils: $30.

Seat Cowl Tray: $25.

Chrome Grab Handle: $25.

Headlight Ears w/Gaskets: $30.

Headlight; bucket, lense, and reflector: $125.

Horn: $25.

Lightened Flywheel: $135.

Napoleon Barend Mirrors: $45.

Oil pan w/Pickup: $40.

38mm Zuena Mufflers, some pitting: $150.

Front & Rear footpegs: $50.

Handle bar perches: $50.

Points Plate: $40.

Rotor: $40.

S-handlebars, some pitting: $40.

Sidestand: $35.

Speedo & Tach: $175.

Starter Cover w/100 S emblems: $50.

Tail light w/Blinker bar: $30.

Timing Advance Mechanism: $40.

Valve Covers, need paint: $40.

Complete Wire Harness: $60.

SHIPPING EXTRA. Check link for part availability.

rear end 32/11 ratio for r100s and others with disc brake, splines look good been on shelf since 1990. 325.00 or trade for /2 parts. Harro tank bag great shape with map pocket, missing front strap it is NOT an elephant bag 175.00 or trade for /2 parts

I call this the SIX PACK rack as it is small. It is weathered, but not rusty or bent. Will fit all 1974-84 models with S-style seat. No photos. 1st CALLER gets it. $ 45.00 plus shipping.

This is a pair of late type mono lever header pipes only. Light surface rust. Perfect for rechrome or heat painting or even better, cloth wrapping. Hate to throw them out. Will fit all R80/R100 models except R80-GS/R100-GS (1985-95). $ 25.00 shipped anywhere in the 48 states. No photos. 1st caller gets them.

This is a NEW NEW reproduction seat cover. Never used. It even has the correct heat seams. Will fit all S/RS/RT/CS models 1977-84 . No photos. 1st caller gets it. no photos. $ 50.00 shipped anywhere in 48 states.

This is a complete RS fairing from a 1979 blue/silver model. Will fit all 1977-95 models. All original paint. Could be used on a daily rider, but needs repainted. Has a few minor cracks from age. Fairing is complete less front bracket and lights. Comes with tinted windshield. May separate. CALL me for more details. Photos for interested buyers.$ 250.00 plus shipping.

Corbin seat used for two years on a 1978 R100S, so it will fit '74 to '84 seat cowl models. I set it up with out the hinges and added a post to be able to assess panniers without removing them. This is a nice feature when loaded with gear that works great. This seat is in great condition and very comfortable. E-mail for pics.

I have a pair of 9.5 compression R100 pistons, part #11 25 1 337 175. These are brand new, still in the box. I was going to dual plug my 1992 R100RS but other projects have gotten in the way. I believe that these will fit any nicasil R100 that has the low compression 8.5 pistons but check your application first. My local BMW dealer quoted me $379.25 each. E-mail if you have any questions or want to see a picture.

21 Excel rim laced to a /5 front hub by Woody's Wheel Works. Hub has been blasted and new bearings and seals installed. Front brake has been blasted with new EBC brake shoes.Custom made stainless steel spokes.Perfect for finishing up your vintage dirt bike.

1979 with 30k.Clutch,flywheel,starter,carbs,electrics included.May sell separately.

n.o.s, luftmeister auxiliary fuel tanks with petcocks original flat black, have not been used. 475.00 plus usps shipping and insurance, $30?

Stock shocks - $50, $25 shipping

Stock horn - $10, $6 shipping

These are used, serviceable parts that could use a good home. Email for pictures if you are interested. Shipping is to the lower 48. If you are interested and elsewhere, just let us know.

Newly chromed, and in great shape. One has a BMW logo emblem sticker- you'll need to remove this in order to screw in the proper rondel emblems on your tank. Sorry the pics aren't great, these were hard to photograph since they're so reflective. So the white you see in the pics is actually the wall/ceiling reflecting in the panels. Happy to answer any questions. Thanks!

The following parts are off a running R100... SHIPPING EXTRA.

19" Snowflake front wheel (tire to be removed) $100.

Clean exhaust nuts: $25.

38mm exhaust headers w/crossover pipe, very good condition. $80.

Battery box w/top clamp & nuts: $25.

Complete headlight-bucket, trim ring, lense: $125.

(2) horns w/brackets: $40.

Complete oil cooler: $125.

Working starter: $60.

Swingarm w/driveshaft: $80.

Complete airbox: $30.

S-handle bars w/cables: $50.

SHIPPING EXTRA. Check link for part availablility.

I have a 19" front rim in real good shape no discs. This front rim has a date stamp of 10/90 so it is the updated version. The 18" rear is for a disc brake,not included a little rough in spots but both are straight.They came off a 78 R100S.

$150.00 for the front,$100.00 for the rear,plus shipping.Pictures available by request.I am in Canada however will be heading for Florida in February and could ship from there,which would make the shipping cheaper.

Price: OBO

I'm converting this bike to a cafe racer and I'm selling a full fairing blue color.http://community.webshots.com/photo/fullsize/2601304830106039024QLyijL

includes: all plastic, mounting brackets (except the one holding the headlight), dash, headlight tunnel and glass, mirrors/mounts and windshield,

Photos for interested buyers, Call me on the telephone for more details, $ 375.00 + shipping

Includes spring,disc,pressure plate and clutch cover.In the bike less then 1000 miles.

I have the following for sale

1 large brandnew never mounted HPN 43LT Poly white (plastic not the nylon) tank with mounting rubbers, petcocks and cap $800

1 HPN rear 7.5LT auxliary tank new white with mounting hardware, cap, and petcocks $400

1 Auxiliary tank 4.5l, under the seat suitable for drinking water or gas with cap and petcocks $275

All tanks are brandnew never mounted and ready to to turn your GS into a real long distance machine. $100 off if you take all three!

Up for grabs is a 15" (stock height) Clearview tinted windshield to fit all years of R100RS. It is in good condition with minor scuffs and hairline scratches that should polish out easily with your favorite plastic polish. There are a couple of very slightly deeper scratches that can be felt with a fingernail. These should also polish out with a bit more elbow grease. The Clearview shield tinting is all the way through the material, so it will not rub off while polishing. All in all this is in very good condition and could pass for new from four feet away. It is not dull or sun faded at all. Includes the rubber edging strip in good condition as well as a complete set of black nylon fasteners. I am replacing it with a new Clearview shield with no tint.

Asking $100 shipped.

For sale are two sets of side cases for Airheads with standard Krauser style side racks.

The first set is a very nice pair of rare white Krausers from my R100RS Motorsport. These cases are in very good to excellent condition and come with matching locks and keys (one key for the top latches, and another for the mounting latches, as new). Inside the bags show little wear and signs of gentle use. The original fabric luggage straps and buckles are still present along with the original Krauser decals. Outside, the lids have been professionally painted white as they had yellowed somewhat with age. The original red Krauser decals have been reproduced on reflective (!) decal stock and are an exact match to the originals. The aluminum strip is in excellent condition and the latches work well. The white trim strips and main shell of the bags show light color change with age. By all accounts including that of the previous owner, these bags were stored for many years and do not appear to have put in much time attached to a bike. Asking $600 or best offer, and we split shipping. I will pack them well.

Next up is a set of Touring cases from a 1993 R100GS PD. The left side is a 27 liter case to accommodate the GS style high mount exhaust. The right side is a standard 33 liter and will fit any airhead with standard Krauser racks. These are in good (not excellent) condition, with minor scratches/marks on the lids and signs of normal use. No cracks or other damage. The elastic bands and cover straps inside are intact and functional. All of the latches work fine. They are all keyed alike and the key is included, however one of the top latches on the left case is missing its lock cylinder. The other latch on that case can still be locked. Badges and reflectors are intact and look good. Reason for selling - I am restoring this bike and treating it to a set of gleaming new bags! $300 or best offer, and split shipping.

Please click the picture link and page through to see photos of all of the bags.