The Internet BMW Riders

BMW Motorcycle Marketplace
 

R- Airhead Twins (R-bikes, 1969-1995): parts wanted

Newest Ads first (18 Ads Total, 18 on this page)

Aftermarket seat for 83 R100RS

Looking for a good aftermarket seat for my 83 R100RS. Day Long, Corbin?

Price: Depends

Location: Loleta, CA

Contact: Jim Carr

Telephone: 707-599-7575

Posted Tuesday, April 25, 2017 at 7:58 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243394

Saddlebag brackets

Looking for a good pair of saddlebag brackets for a 1977 R100RS. Chrome or black in decent condition. Thanks

Price: fair

Location: Sioux Falls, S. Dak.

Contact: T Swanson

Telephone: 605 595 4690

Posted Tuesday, April 25, 2017 at 11:17 am (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243375

Handlebar Master Cylinder assembly

I'm after a front brake handlebar master cylinder assembly (or whole right perch) to upgrade my undertank /7 setup. Ideally for twin throttle cables and single disc.

Thanks!

Price: Negotiable

Location: Melbourne, Australia

Contact: Rhys Vleugel

Telephone: +61416779826

Posted Monday, April 24, 2017 at 5:23 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243364

SWB /5 Seat

I am looking for an original seat for the R75/5 Short Wheel Base. I went to recover my seat but the foam looks like its beyond repair.

I have R90 stuff I can trade as well as straight cash.

Price: $100 on uup

Location: Atlanta GA

Contact: Bobby Russell

Telephone: 770.366.9397

Posted Saturday, April 22, 2017 at 5:48 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243311

R/90/S pistons

Looking for stock or 1 st over pistons,prefer new, but will consider used. Thanks!

Price: TBD-Fair

Location: Lakeville,Mn.

Contact: Dale Lehnert

Telephone: 952-215-4502

Posted Friday, April 21, 2017 at 11:32 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243297

R/90 cyls.1974-75

Looking for stock bore cyls to use as is or to be bored to 1st over. Have parts to trade or buy. Thanks!

Price: TBD-Fair

Location: Lakeville,Mn.

Contact: Dale Lehnert

Telephone: 952-215-4502

Posted Friday, April 21, 2017 at 11:28 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243296

Toe Heal shifter

Looking for toe heal shifter for a 1984 r100 rt The shifter was used on a Police bike made out of steel not the aluminum

Price: reasonable

Location: Howell

Contact: Mike Kowal

Telephone: 732 239-8541

Posted Thursday, April 20, 2017 at 7:44 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243281

Reflector, Lens, and Trim Ring needed

I need the headlight parts to upgrade my /5 to an H4 headlight. The above mentioned parts need to come from either a 1979-84 R65 or a 1983-84 R80 ST

Price: Reasonable

Location: Pulaski VA

Contact: Kenneth McDonald

Telephone: 276 730 5159

Posted Wednesday, April 19, 2017 at 1:42 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243251

R80GS speedo

I'm looking for a good used (or NOS) speedo for a 1981 R80GS. This has the 85 MPH face and the W1244 ratio. This is the very last part that I need to finish a year long restoration. Any help appreciated. Please send photo and price with first email.

Price: Open

Location: VA 22473

Contact: John Lacko

Posted Friday, April 14, 2017 at 5:55 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243160

60/5 CYLINDERS OR PISTONS

I am looking for a good pair of 600 cylinders in STANDARD bore from a 60/5 OR a pair of 2nd over pistons in good shape. (plus 1 mm).Prefer no rust or pitting in cylinder liners. If you can oblige, Paypal or check is waiting. Send pictures if possibleSend price and shipping costs.

Price: Your price if acceptable.

Location: Florida

Contact: Robert James

Telephone: email only.

Posted Friday, April 14, 2017 at 1:54 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243154

US handle bars for /6 needed

I'm looking for a good, straight pair of standard US bars to fit my /6. A lot of these bikes got converted to S bars. I'm hoping to find a good strait bar for my bike. Mine are slightly bent back on one side.

Price: fair market

Location: Fort Worth, TX

Contact: Chris Doskocil

Telephone: 817-919-5782

Posted Tuesday, April 11, 2017 at 11:58 am (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243092

wanted 2 into 1 left side exit exhaust

Building a side rig and looking for a left exit header pipes R80ST or GS front pipes would do.

Price: open

Location: new hampshire

Contact: joe latouche

Telephone: 603 520 1765

Posted Tuesday, April 11, 2017 at 9:14 am (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243091

REAR FENDER FOR R80G/S OR R80ST

Looking for a good rear fender for an R80 G/S or R80st.

Price: ?

Location: Glenmoore, PA

Contact: Mac Kirkpatrick

Telephone: 6107156530

Posted Saturday, April 08, 2017 at 4:12 am (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243018

Looking for 38mm Exhaust pipes for 1973 r75/5 swb

I need a good to excellent set of exhaust pipes for my 73 r75/5 short wheel base.I live in the San Diego, CA area but am open to shipping them here.

Price: reasonable

Location: Jamul, CA

Contact: William Pardo

Telephone: (619)203-5306

Posted Friday, April 07, 2017 at 5:55 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/243015

/6 Large Tank, fenders, side covers

I'm looking to take my 76 R90/6 back to its original. I have a large /7 tank on it now. Would prefer black, monza blue, but lets start with one that is not useless and workable. If you have complete set that is a bonus.

Price: $100 and up

Location: Atlanta

Contact: Jeff Haas

Telephone: 5132887723

Posted Thursday, April 06, 2017 at 12:51 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/242982

S fairing

Does any one have a busted up S fairing they can sell me? preferably with the dash board still intact? I need something affordable I can glass back together.

Price: TBD

Location: Paige Texas

Contact: John Tabor

Posted Thursday, April 06, 2017 at 8:49 am (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/242978

Need an 1988 or newer RS/RT GS Mystic R100R motor

I bought a beauty of a bike in my 1992 GS R100 R. The previous owner was the only owner. He passed in L.A. and I bought this bike from his family. The original owner installed, lighter non-stock rocker arms, one of which cracked on me six months ago. I took my bike to BMW/Honda of Hollywood and found a similar rocker (and new) arm which I sent to them. The bike ran fine for a month or two, and I’m sure you’re guessing now that something went wrong! I have a great friend who was in town. Upon in inspection we revealed two loose studs on the left side of the bike, leading us to believe that the shop had either ignored a larger problem, or created the problem in the first place! Shot engine. The bad news got worse for me as the shop has now closed down. They actually relocated to Burbank but did away with their BMW shop leaving me S.O.L. The bike needs a new engine. I’m hoping to find a used: 1988 or newer RS/RT GS Mystic R100R engine. Do you have any leads? Do you know of anyone you could sent this e-mail to that could help me keep the memory of the original owner alive and well? Other than this issue the bike is worth saving. Looking for a miracle.My name is: David Chrzanowskie-mail: davidchrzanowski3@gmail.comPh: 773.307.4362 (texts or calls are welcome)Thank you!David Chrzanowski

Price: 300-500

Location: Los Angeles

Contact: David Chrzanowski

Telephone: David

Posted Wednesday, April 05, 2017 at 6:04 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/242968

S fairing

Does anyone have a busted up S fairing they can sell me? Hopfully with the dash panel still intact.I need something affordable I can glass back together.

Price: TBD

Location: Paige Texas

Contact: John Tabor

Posted Wednesday, April 05, 2017 at 12:52 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/242955