The Internet BMW Riders

BMW Motorcycle Marketplace
 

R- Vintage Twins and Singles (R-bikes, pre 1970): all ads

Newest Ads first (21 Ads Total, 21 on this page)

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): bikes for sale

1966 BMW R60

A matching #'s BMW 1966 R60. Engine, transmission, oil slinger, and final drive have been rebuilt/restored. Has been repainted and pin striped as well. 850 miles on the rebuilt engine and refurbished speedo/odometer. Runs solid, starts on first or second kick. Call for additional information.

See more at <https://imperial.craigslist.org/mcy/6267221614.html>

Price: 11,500

Location: Brawley, CA

Contact: TJ Mack

Telephone: 760 344 1950

Posted Sunday, September 17, 2017 at 10:59 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246349

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): parts for sale

/2 Parts and Accessories

Rare Avon Lynx /2 fairing excellent condition, very light handlebar and fork mounted fairing - $350.

R60 Valve cover, a chipped lower fin - $30

Cravin racks (2), good condition, one chrome and one black, needs repaint to be perfect - $75ea

/2 Headlight assembly complete with speedo needing rebuild, lens, and chrome trim ring, one dent in bucket and trim ring - $425

R26 or R27 Large Box of parts, NOS gaskets, carb parts, gorgeous FULL Complete set of front and rear shocks, NOS voltage regulators, NOS coils, many bags of NOS parts - $750

Complete taillight assembly - $150.

Taillight shell - $80.

Large dual Denfeld seat, excellent original with chrome handles - $350.

R50 Headers from low mileage original bike, excellent chrome, cross-over connector damaged on one side - $100.

/2 Narrow seat cover, new repro, $75.

Pair of R50 cylinders with SS pushrod tubes, no damage, look excellent, $450.

Wixom fairing with windshield and mounting hardware, MINT Original like new, black with white hand pinstripes - $500.

See more at <http://boston.craigslist.org/nos/mpo/6304105377.html>

Price: As noted

Location: NH

Contact: steve t

Telephone: 207 216-0943

Posted Friday, September 15, 2017 at 2:57 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246327

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): parts for sale

Exhaust Pipe set for R50 or R60/2

Original BMW parts - used chrome headers excellent in appearance from a low mileage R50US for R50 or R60/2 with chrome threaded nuts. One pipe has crossover flange removed. other is complete.

Price: 100 plus shipping

Location: NH

Contact: steve t

Telephone: 207 216-0943

Posted Friday, September 15, 2017 at 2:50 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246325

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): parts wanted

Needed: PLUNGER FRAME

Needed: a plunger frame. Prefer a r51/2 but any or both will do.

Price: Negotiable

Location: Ohio

Contact: Mike Kramer

Telephone: 14193101787

Posted Thursday, September 14, 2017 at 1:12 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246307

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): parts for sale

1951 r67 r51/3 parts

Ignition unit in good working order $600. Generator unit in good working order. $600. Pagusa rear passenger seat,installed and taken off,appears brand new. $250.

See more at <http://carlsonspressurewashing.com>

Price: $600. $600. $250.

Location: Redwood City,Ca

Contact: Mark Carlson

Telephone: 650 868-0801

Posted Thursday, September 14, 2017 at 1:38 am (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246296

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): parts for sale

1968 BMW R60US

I am offering a frame in original finish, the bare engine block and a State of Colorado title all with matching numbers. Photo's available. Shipping is on the buyer and I would be glad to discuss shipping options. $950.00

Price: $950.00

Location: Denver

Contact: Bob Ohman

Telephone: 3035709333

Posted Wednesday, September 13, 2017 at 3:38 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246279

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): bikes for sale

Jeff Dean's 1954 R51/3 restored by Tim Stafford

This amazing R51/3 restored by myself for Jeff Dean. Pleas click on the link for a lot of information and photos.Pleas do NOT contact Jeff, as he asked me to sell the bike for him. Of course some might need to ask Jeff if I have his permission ;-)

See more at <http://www.ebay.com/itm/1954-BMW-R-Series-/222644001689?hash=item33d69ddb99:g:6LkAAOSwlEdZuXdT&vxp=mtr>

Price: 35,000

Location: San Diego CA

Contact: Tim Stafford

Telephone: 619-281-9614

Posted Wednesday, September 13, 2017 at 3:25 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246278

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): parts for sale

SCHURMANN OEM CHROME RIMS

I am offering a new old stock pair of Schurmann rims

The rims are internally marked Schurmann Din Etro 2.15b V18 and have 40 Spoke holes.

Buyer pays shipping and I take PayPal or personal check.

Shipping is the Buyer's obligation

Price: $475.00 for the pair

Location: Denver CO

Contact: Bob Ohman

Telephone: 3035709333

Posted Wednesday, September 13, 2017 at 3:25 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246277

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): bikes for sale

1963 R69S Restored by Tim Stafford

Completely restored, nothing untouched. Yes, even the horn and speedometer came apart for restoration. Bike is ready to ride, yet it is in show condition. Is there any where or scratches? Yes, the normal ones on the center and side stand. And there is some swirls in the paint you might want to buff out, but this is normal with black paint and most people would not even call this out in a listing. Most paint work on these bikes is no were near as nice as this bike, I can just see everything.

The short description of this amazing 1963 BMW R69S is it was restored by me (Tim Stafford Restorations) about 2 years ago (Sep. 2015) and/or 800 miles ago. I put a about 200 miles on it before delivery, customer put less than 500 on it and I just put about 200 miles on it last week. He has $42,000 into the bike. No, not the restoration, but bike+restoration=42K. We started with a very nice low mileage bike built on Apr. 8th 1963 imported by Butler & Smith. I bought the bike in '09 from the family of the 2nd owner. It had sat for years in a garage in Arizona, yet it was a California bike and STILL has the original black plate on the bike, title and Reg. I have before restoration pix if needed. Because of the nice original condition of the bike it made for a very correct restoration down to the original hardware. This bike is a cream puff (translation; very nice all the way around) and the only reason he (my customer) is selling it his legs are shot and he can no longer kick start a bike, even though it starts very easy. Email for video of me starting it or just look on my FB page.

Below is a old expired add, but has a lot of information.

See more at <http://www.ebay.com/itm/-/232362774490?ssPageName=ADME:L:EOISSU:US:1123>

Price: 35,000

Location: San Diego CA

Contact: Tim Stafford

Telephone: 619-281-9614

Posted Wednesday, September 13, 2017 at 3:19 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246276

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): parts wanted

Bing 24/159 and 24/160

Looking for a pair of Bing Carburetors for a 1954 R51/3

Thanks

Price: TBD

Location: Nor Cal

Contact: Sergio R

Telephone: 9259802015

Posted Wednesday, September 13, 2017 at 2:31 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246275

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): accessories wanted

Hoske tank tool box lid and knee pad brackets

Looking for tool box lid and knee pad brackets with screws. If you have them please write and I will you email photos of what I need to confirm a match.

Price: ?

Location: Mount Kisco, NY

Contact: Steve Bauer

Telephone: 9149609669

Posted Wednesday, September 13, 2017 at 12:32 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246272

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): bikes for sale

1966 R50/2- Number matching 12 year old Vech Masterpiece

Twelve year old Vech/Benchmarks restoration- complete top to bottom and front to back renovation...Liquid frame repaint, slingers, bearings across the board...cables, etc.- the whole works...Work included a full stainless bolt upgrade and 12 volt conversion. Bike has been ridden about 1,500 miles over the past twelve years. Total mileage: 65k and odometer shows it- Photos taken on 9.1.2017. Recent work (within 200 miles) includes: valve job and spark plug insert repair by MAX BMW (8.2017) Replacement of many small dried out rubber bits- including driveshaft boot. Reproduction correct petcock. Full toolkitOriginal owner’s manual (not repro) Full fluid (4 locations) update. Comes with an unmounted set of Heidenau tires+Michelin tubes and an uninstalled H4 bulb update.Bike starts in 1-3 kicks, all parts work correctly, drives very nicely and is very reliable.Small defects: Paint is not museum quality as the rest of the bike is… Chrome on rims is crazing… and there are a few spots of rust. There is no key for the steering lock nor to tank storage panel.

See more at <https://www.flickr.com/photos/154654467@N03/shares/402PTU>

Price: $13,000

Location: Ann Arbor, MI

Contact: Steven Sivak

Telephone: 248.860.3228

Posted Saturday, September 09, 2017 at 10:47 am (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246190

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): parts for sale

BMW R 50 50/2 60 60/2 69 S HOSKE gas tank

Original HOSKE gas tank for BMW R 50 50/2 60 60/2 69 S. Good condition. Please ask for pictures.

Price: 1100,-€

Location: Germany

Contact: Damian Thomas

Posted Thursday, September 07, 2017 at 9:59 am (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246155

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): parts for sale

R69S heads

Nice rebuilt set of R69S heads with new rotating valves seats and Springs.

Price: 1200

Location: Houston, TX

Contact: Ash Histand

Telephone: 713-962-6489

Posted Wednesday, September 06, 2017 at 7:09 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246147

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): bikes wanted

Wanted 1950-1969 BMW motorcycle or parts

Looking for a 1955-1069 BMW twin or single cylinder. Restoration project or a basket case OK.

Paying premium for parts too.

Many successful transactions here on the IBMWR.

I will handle the shipping.

WANTED

WANTED

Price: OPEN

Location: CHICAGO IL

Contact: Premo B.

Telephone: 3127725352

Posted Tuesday, September 05, 2017 at 7:45 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246130

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): accessories for sale

Corbin Leather BENCH SEAT for /2 R50-R69s. Possibly 1-of-a-kind.

Here is what you may also see as a unique seat offering. Since purchasing this in "as-new" (very lightly used) condition, and without a flaw, I have searched the net high and low to see any other like it and there is no such puppy. This is a genuine Corbin-Made seat (tag and all), that was done in black leather with white piping. Like it's separated Corbin counterparts, the driver portion of the seat drops into the space normally left under a solo seat. On the rear it looks like it requires a pair of stock rear Denfeld bench seat mounting brackets to drop down into your fender mount. I have the sport tank (per picture of approx. how it fits/looks) and the seat tip will be squeezed a bit for fit. Since this bike, which is now for sale was....and sadly...is still in this state of 99.2% completion, I have decided on a /5 for my 2-up riding and will be selling my R100/2, but with the stock look it deserves to have, making this unique and very comfortable bench available. Please note in picture that my fender was only "mocked" into position with a towel over rear wheel to support it up, so I never had the seat fully installed and the finalized look will be minutely more "snug" against the bike as a guess.

See more at <https://www.flickr.com/photos/drumb_question/sets/72157688590314605>

Price: 365

Location: Vancouver WA (not B.C. !!)

Contact: Alfred M.

Telephone: 503.998.3786

Posted Monday, September 04, 2017 at 4:17 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246108

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): bikes for sale

1968 R50/2

Selling my 68 50/2. This is a low miles(22900) surviver that has been restored to original condition with upgrades. Some new paint. Rebuilt frt fork ,brakes, carbs, ign. New tires, solo seat, handlebars and grips and horns and SS peashooter mufflers. Great looking and riding bike.

Price: 10,500.00 OBO

Location: Lansing Mi.

Contact: Pete Root

Posted Monday, September 04, 2017 at 12:00 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246091

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): parts for sale

R/69/S Frame and forks

Powder coated,new tapered,steering and swingarm bearings.Original ID tag matches frame #.CALL if interested please.

Price: $1500

Location: Lakeville,Mn.

Contact: Dale Lehnert

Telephone: 952-215-4502

Posted Monday, September 04, 2017 at 1:58 am (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246084

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): parts wanted

WTB or trade rear fender R51/3

Looking for a rear two piece fender. I have one but it is in poor shape and need bodywork/paint. I prefer not to deal with it and find an acceptable replacement ready to go. Willing to trader and add $$ as required.

Price: Open

Location: Nor Cal

Contact: Sergio R

Posted Sunday, September 03, 2017 at 9:30 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246081

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): parts wanted

Looking for wixom mounts for /2

I'm looking for a set of wixom mounts for a /2 . I have the bags , but need a set of brackets. Thanks

Price: ????

Location: Tennessee

Contact: Joel Alderson

Telephone: 6158286642

Posted Sunday, September 03, 2017 at 9:33 am (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246071

Category: R- Vintage Twins and Singles (R-bikes, pre 1970): parts wanted

r26 single seat

I'm looking for a single seat & all mounting bits for an r26 (or r27).

Price: market or cheaper

Location: Atlanta, GA

Contact: George L

Posted Friday, September 01, 2017 at 9:17 pm (CDT)

Direct link to this Ad: http://marketplace.ibmwr.org/ads/view/id/246054